Glide N Grab 1-877-306-5020

SM3-AL
Aluminum 100% Extension
1,000 lb Capacity

SM2-AL
Aluminum 70% Extension
1,000 lb Capacity
Super Compact Low Profile Slide
Features a configuration that allows the deck height to be as low as 2.25" and only reduces tray (storage) width by 3/8" each side.

SM3-HD + Steel Heavy Duty 100% Extension 2,500 lb Capacity Super Compact Profile under 5"
SM3-SP Steel 100% Extension Multiple Capacity Shown without Deck Fully Collapsed
SM3-SP Steel 100% Extension Fully Extended
MOTOR DRIVE Our units can be augmented with electric motor drive operation. Infrared remote and hardwire controls.

Glide Profile Heights W/O Trays:
Aluminum 2-Rail 2-7/8” N/A 300 lbs. up to 48”
Aluminum Ex 2-Rail 3-1/2” N/A 1000 lbs. up to 108”
Aluminum Ex Dual Direction 3-1/2” N/A 1000 lbs. up to 108”
Steel Low Profile 2-3/8” 2-3/4” 300 lbs. up to 48”
Steel Mid Profile 2-7/8” 3-1/4” 600 lbs. up to 60”
Steel Standard Profile 2-7/8” 3-7/8” 1000 lbs. up to 108”
Steel Heavy-Duty Profile 4” 4-1/4” 2000 lbs. up to 108”
Steel Dual Direction 3-3/8” N/A 1000 lbs. up to 108”
Steel Heavy-Duty Dual 3-7/8” N/A 2000 lbs. up to 108”
TIP DOWN 's

Tip-Down Aluminum 5-1/2” N/A 200 lbs. up to 45”
Tip-Down Steel 2-5/8” N/A 250 lbs. up to 60”
Tip-Down Steel 2-5/8” N/A 250 lbs. up to 60” (rails only)
TOOL BOARD Slide's

Tool Board Mid Profile 2-7/8” 3-1/4” 600 lbs. up to 60”
Tool Board Standard Profile 2-7/8” 3-7/8” 1000 lbs. up to 108”
Tool Board Dual Direction 3-3/8” N/A 1000 lbs. up to 108”
Note: These numbers are subject to change depending on customer’s requirement. OPTIONS SPRING LOCK: (HSL) offers a simple pull handle design for easy lock in and lock out (our twist lock is standard). This option is available on the Mid Profile and Standard Profile, 2-Rail and 3-Rail Steel Glide's and the M2-HD Aluminum Glide only . POWDER COATING: (APRI) the textured polyester powder coating provides outstanding chemical and abrasion resistance. The powder coating is available for all products. It is available in either textured black or silver. Please allow two weeks in addition to the standard lead time for the powder coating process. TRAYS: There are two stock types available: 1) 5/8” plywood, carpet covered, with a 1” aluminum lip 2) 1/8” thick aluminum tray with 1” lip (lip height can be modified per customer requirements) 3) Customer specified unit. CUSTOM TRAYS: Per your needs.